• Home
• About Thomas Hardware

Categories

• Anchors
• Binding Screws
• Biscuit Plugs
• Biscuits & Plugs
• Bolts
• Captive Screws
• Clevis Pins
• Concrete Screws
• Cotter Pins
• Expansion Plugs
• Fasteners
• Flange Nuts
• Glues
• Hex Spacers
• Nuts
• Pins
• Retaining Rings
• Rivets
• Screws
• Self-Tapping Screws
• Spacers & Standoffs
• Threaded Assemblies
• Threaded Inserts
• Threaded Rods & Studs
• Tolerance Rings
• Washers
• Wood Screws

Recent Posts

• 100 1/2″ Black Plastic Flush Type Hole Plugs 7/8″ Head
• M8 x 1.25 Metric Int. Thd., M12 x 1.75 Metric Ext. Thd., 12.5mm Lg., E-Z LOK Thread Inserts, Metric Steel (1 Each)
• Nylon 6/6 Self-Locking Acorn Nut, 1/4″-20 (Pack of 100)
• Crown Bolt 62622 1/4-Inch by 5-Inch Zinc Plated Eye Bolt, Silver
• Tapered Section Plain Stainless Steel Axially Assembled Internal Retaining Ring, 7/8″ Bore Diameter, 0.042″ Thick (Pack of 5)

100 1/2″ Black Plastic Flush Type Hole Plugs 7/8″ Head

		Buy New: $ 4.99 New (1) from $ 4.99
(more)

Industrial Fasteners
100 1/2″ Black Plastic Flush Type Hole Plugs 7/8″ Head
100 1/2″ Black Plastic Flush Type Hole Plugs 7/8″ Head
Biscuits Plugs at Industrial Fasteners at Thomas Hardware.

No Tag

M8 x 1.25 Metric Int. Thd., M12 x 1.75 Metric Ext. Thd., 12.5mm Lg., E-Z LOK Thread Inserts, Metric Steel (1 Each)

		Buy New: $ 2.33 New (1) from $ 2.33
Prevent/repair stripped threads, No special tools required, Install with bolt and wrench, Power drive tools available for volume use (more)

Industrial Fasteners
M8 x 1.25 Metric Int. Thd., M12 x 1.75 Metric Ext. Thd., 12.5mm Lg., E-Z LOK Thread Inserts, Metric Steel (1 Each)
M8 x 1.25 Metric Int. Thd., M12 x 1.75 Metric Ext. Thd., 12.5mm Lg., E-Z LOK Thread Inserts, Metric Steel (1 Each)
Threaded Inserts at Industrial Fasteners at Thomas Hardware.

No Tag

Nylon 6/6 Self-Locking Acorn Nut, 1/4″-20 (Pack of 100)

		Buy New: $ 7.90 New (1) from $ 7.90
Acorn Nuts cover exposed threads, provide finished appearance; self-locking due to distorted thread, Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations, Drive system is a hexagon-shaped head, Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads, Ensure a lasting hold for any project (more)

Industrial Fasteners
Nylon 6/6 Self-Locking Acorn Nut, 1/4″-20 (Pack of 100)
Nylon 6/6 Self-Locking Acorn Nut, 1/4″-20 (Pack of 100)
Nuts at Industrial Fasteners at Thomas Hardware.

No Tag

Crown Bolt 62622 1/4-Inch by 5-Inch Zinc Plated Eye Bolt, Silver

		Buy New: $ 0.66 New (1) from $ 0.66
1/4-Inch Body diameter, 5-Inch Fastener length, Zinc plated finish, For general applications, 1 pack (more)

Industrial Fasteners
Crown Bolt 62622 1/4-Inch by 5-Inch Zinc Plated Eye Bolt, Silver
Crown Bolt 62622 1/4-Inch by 5-Inch Zinc Plated Eye Bolt, Silver
Bolts at Industrial Fasteners at Thomas Hardware.

No Tag

Tapered Section Plain Stainless Steel Axially Assembled Internal Retaining Ring, 7/8″ Bore Diameter, 0.042″ Thick (Pack of 5)

		Buy New: $ 7.88 New (1) from $ 7.88
Tapered Section Plain Stainless Steel Axially Assembled Internal Retaining Ring, 7/8″ Bore Diameter, 0.042″ Thick (Pack of 5) (more)

Industrial Fasteners
Tapered Section Plain Stainless Steel Axially Assembled Internal Retaining Ring, 7/8″ Bore Diameter, 0.042″ Thick (Pack of 5)
Tapered Section Plain Stainless Steel Axially Assembled Internal Retaining Ring, 7/8″ Bore Diameter, 0.042″ Thick (Pack of 5)
Retaining Rings at Industrial Fasteners at Thomas Hardware.

No Tag

Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 5)

		Buy New: $ 7.05 New (1) from $ 6.90
Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 5) (more)

Industrial Fasteners
Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 5)
Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 5)
Retaining Rings at Industrial Fasteners at Thomas Hardware.

No Tag

Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 7 mm Shaft Diameter, 0.80 mm Thick (Pack of 5)

		Buy New: $ 6.89 New (1) from $ 6.89
Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 7 mm Shaft Diameter, 0.80 mm Thick (Pack of 5) (more)

Industrial Fasteners
Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 7 mm Shaft Diameter, 0.80 mm Thick (Pack of 5)
Metric Tapered Section Plain DIN 1.4122 Stainless Steel Axially Assembled External Retaining Ring, 7 mm Shaft Diameter, 0.80 mm Thick (Pack of 5)
Retaining Rings at Industrial Fasteners at Thomas Hardware.

No Tag

Tapered Section Black Phosphate Steel Axially Assembled Internal Retaining Ring, 4-1/2″ Bore Diameter, 0.109″ Thick (Pack of 1)

		Buy New: $ 7.64 New (1) from $ 7.64
Tapered Section Black Phosphate Steel Axially Assembled Internal Retaining Ring, 4-1/2″ Bore Diameter, 0.109″ Thick (Pack of 1) (more)

Industrial Fasteners
Tapered Section Black Phosphate Steel Axially Assembled Internal Retaining Ring, 4-1/2″ Bore Diameter, 0.109″ Thick (Pack of 1)
Tapered Section Black Phosphate Steel Axially Assembled Internal Retaining Ring, 4-1/2″ Bore Diameter, 0.109″ Thick (Pack of 1)
Retaining Rings at Industrial Fasteners at Thomas Hardware.

No Tag

Marson Air Riveter – M-3 / MAR-39054

		Buy New: $ 230.95 New (3) from $ 230.95
(more)

Industrial Fasteners
Marson Air Riveter – M-3 / MAR-39054
Marson Air Riveter – M-3 / MAR-39054
Rivets at Industrial Fasteners at Thomas Hardware.

No Tag

Metric Tapered Section Phosphate & Oil Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 100)

		Buy New: $ 7.66 New (1) from $ 7.66
Metric Tapered Section Phosphate & Oil Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 100) (more)

Industrial Fasteners
Metric Tapered Section Phosphate & Oil Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 100)
Metric Tapered Section Phosphate & Oil Steel Axially Assembled External Retaining Ring, 8 mm Shaft Diameter, 0.80 mm Thick (Pack of 100)
Retaining Rings at Industrial Fasteners at Thomas Hardware.

No Tag

« Older Entries

Copyright © 2008 Thomas Hardware | Industrial Fasteners | Powered by Wordpress