Zinc Plated Steel Self Tapping Screw, Pan Head, Phillips Drive, #8-18, 1-1/2″ Length (Pack of 100)
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.
Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.
Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques – these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Price:$9.64
KIT-1553B Box+PCB, Grey Handheld Soft Sided Plastic Box, Grey. with PR1553B PCB, Box = 4.6 x 3.1 x 1.0 in
This kit is a Hammond 1553B soft-side plastic enclosure packaged together with a matching ProtoBoard 2-hole per strip PCB.The soft-sided ergonomic hand-held electronic case has built-in PCB standoffs. It has 1 removable end panel and a recessed top for membrane overlay or keypad. Lap joint construction provides protection against dust accumulation and splashing water. The PR1553B prototyping circuit board (PCB) has the convenient 2-hole ProtoBoard pattern, which provides an easy way to connect parts while maximizing usable board area.
Price:$14.61
Stainless Steel Self Tapping Screw, Flat Head, Phillips Drive, #6-20, 3/4″ Length (Pack of 100)
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.
Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in th
Price:
Du-Bro 2298 3.0 mm x 12mm Flat-Head Self-Tapping Screw (8-Pack)
Since 1959, the Broberg family has owned and operated DU-BRO Products, Inc. During that time, the company has grown from a single product, to 4 companies in three industries, offering more than 1,200 items. Innovation and reliability has been synonymous with DU-BRO for all these years, and coupling that with great customer service and a knowledgeable, helpful staff, has made DU-BRO a staple line in all the industries they have taken on.
Price:$1.80
Dorman 700203 Self-Tapping Screw
Dorman 700-203 Scrw Slftap #8-18×3/4
Price:$6.99
Tags: 700203, Dorman, Screw, Self-Tapping
10 X 3 Self-Tapping Screws Combo / Pan Head / Type A / Steel / Zinc / 700 Pc. Carton
10 X 3 Self-Tapping Screws Combo / Pan Head / Type A / Steel / Zinc
Price:
Zinc Plated Steel Self Tapping Screw, Flat Head, Phillips Drive, #8-18, 1″ Length (Pack of 100)
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.
Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.
Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Price:$6.70
KIT-1553DBAT Box+PCB, Grey Handheld Soft Sided Plastic Box with Batt. Compartment, with PR1553DBAT PCB, Box = 5.8 x 3.5 x 1.0 in
This kit is a Hammond 1553DBKBAT soft-side plastic enclosure packaged together with a matching ProtoBoard 2-hole per strip PCB.The soft-sided ergonomic hand-held electronic case has a battery compartment for 2xAA or 1x9V (battery clips included). It has a long life “three snap” battery door. It has 1 removable end panel and a recessed top for membrane overlay or keypad. Lap joint construction provides protection against dust accumulation and splashing water. The PR1553DBAT prototyping circuit board (PCB) has the convenient 2-hole ProtoBoard pattern, which provides an easy way to connect parts while maximizing usable board area.
Price:$20.73
Tags: Batt., Box+PCB,, Compartment,, Grey, Handheld, KIT-1553DBAT, Plastic, Sided, Soft, with
Handiman 609 10X1 PHIL PH S/S TAP SCR 4/CD PHILLIPS HEAD PAN SELF-TAPPING SCREW
18-8 Stainless steel. Sold by the box.
Price:$5.02
Zinc Plated Steel Self Tapping Screw, Hex Head, #10-16, 3/4″ Length (Pack of 100)
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.
Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.
Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.
Price:$9.55
